Universal Third Brake Light Backup Camera System for RV / Bus

SKU: VS605M

• The universal third brake light camera mounts onto any flat surface of RV, bus and cargo van.

Our universal brake light backup camera system uses top CCD image sensor with 600 TV lines to produce the highest quality of video image possible. CCD lenses are superior to cheaper CMOS lenses. They deliver crisper images and a much better color balance. With this high quality CCD camera, and our crispy-clear TFT LCD monitor, you can see the best image quality.

• Stand Alone Color Monitor with 2 mounting options.

Our 7 inch TFT LCD stand alone monitor features 2 installation brackets for your convenience and offers a 800X480 resolution for great video quality. Following is a recommended installation method of our sef stand monitor, and you can also mount it on your dash if you like.

• Complete Backup Camera and Monitor System.

This universal flat surface mounted backup camera system comes with a wide 170° angle camera, a 7 inch TFT LCD stand alone monitor, a 10 meters extension cable, power connection wires, that’s everything you need for installation.

• 100% Waterproof Camera.

The backup camera is built with IP68 rating, which means it is 100% waterproof.

Specification for this universal third brake light camera:

• Image sensor :CCD
• Resolution :756(H) X 504(V)
• TV line :600TV lines
• TV System :PAL/NTSC
• Waterproof rating :IP68
• Lens :1.7mm
• Viewing angle :170°
• Power voltage :12V-24V
• Operation Temp. :-20℃~+70℃
• White Balance :Auto

Rear View Monitor Specification:

• Monitor size :7 inch
• Resolution :800 X 3 (RGB) X 480
• Contrast :16:9
• TV System :PAL/NTSC
• Monitor weight :500g
• Video input : 2 channels
• Power  :DC12V-24V
• Brightness :400cd/㎡

In The Box

• universal Third brake light backup Camera
• 7inch TFT LCD self standing monitor
• 10 meters video extension cable
• 1.5 meter power supply cable
• kit for installation
• manual

How to wire it ?
It is very easy for wiring. You only need to wire the rear view monitor, because our monitor will provide power source and video signal to the camera. Red wire of monitor goes to power source, green wire for reverse and the black for ground. The rear view camera will turn on automatically when you put the vehicle into reverse.